![]() |
|
||||
|
|
Apple / Iphone / Ipad Tudo sobre telefones da Apple |
![]() |
Opções do Tópico | Modos de Exibição |
![]() |
#11 |
Registrado em: 18/05/2006 Location : GB Posts: 1,356
Agradecimentos: 219
Agradecido 989 vez em 321 Posts
|
![]() - Em Curto - Nao Carrega - Error 23 (Software) - LCD em Branco |
![]() |
![]() |
Os seguintes 4 Usuários disseram Obrigado AndersonDC por essa útil mensagem: |
![]() |
#12 |
Novato
![]() Registrado em: 05/10/2009 Location : Patos de Minas MG Posts: 24
Agradecimentos: 22
Agradecido 18 vez em 2 Posts
|
![]()
So para tecnicos com experiencia e hardware
Irei postar aqui um procedimento tecnico para resolver o problema do wi-fi eu particulamente nao queria postar esse processo aqui por aqui se encontrar muitos usuarios sem experiencia alguma na area de hardware Lembro que esse processo vcs realizarao por sua conta e risco ![]() Esse componete contornado de vermelho (MARVELL 88W8686) acima e o responsavel pelo iphone achar sinais emitidos pelo seu roter e tambem sinais bluetooth. Depois de visualizado com uma estaçao a vapor ou lazer faça uma resolda com pasta base Faça o mesmo processo com essa parte da antena contornado de vermelhor e azul. ![]() POR FAVOR NAO FAÇA ESSE PROCEDIMENTO SE VC NAO E TENCNICO Estou resolvendo esse problema aqui em minha assistencia em 90% dos casos Mais detalhes podem add [Somente usuários registrados podem ver os links. ] |
![]() |
![]() |
Os seguintes 5 Usuários disseram Obrigado dudutama por essa útil mensagem: | cenio (04/09/2010), gscelular (05/11/2011), kolby (02/10/2010), Ouricell (04/05/2011), washingtom (20/05/2012) |
![]() |
#13 |
Registrado em: 18/05/2006 Location : GB Posts: 1,356
Agradecimentos: 219
Agradecido 989 vez em 321 Posts
|
![]()
Guia de Abertura do iPhone 3G - Fonte: GSMForum
Step 1 Begin by removing the sim tray, using the included sim card removal tool (or a paperclip if you've lost the tool.) ![]() Step 2 Holding your device on end you will notice two small screws on either side of the dock. These screws must be removed in order to open the case. ![]() Step 3 Insert a small thin tool between the chrome ring and front panel glass directly above one of the screw holes. You will need to exert a small amount of pressure to seperate the display from the back panel. ![]() |
![]() |
![]() |
![]() |
#14 |
Registrado em: 18/05/2006 Location : GB Posts: 1,356
Agradecimentos: 219
Agradecido 989 vez em 321 Posts
|
![]()
Step 4
Lift the panel up from the dock end being careful not to tear or break any ribbons connected near the other end. ![]() Step 5 Unplug ribbons 1 and 2 by lifting them from the main board. Under ribbon 2 you will need to find and unclip ribbon 3, then carefully remove the display assembly. ![]() |
![]() |
![]() |
![]() |
#15 |
Registrado em: 18/05/2006 Location : GB Posts: 1,356
Agradecimentos: 219
Agradecido 989 vez em 321 Posts
|
![]()
Step 6
Remove the seven screws circled in red. Note: One screw is located under the DO NOT REMOVE sticker ![]() Step 7 Unplug ribbon 4. ![]() |
![]() |
![]() |
![]() |
#16 |
Registrado em: 18/05/2006 Location : GB Posts: 1,356
Agradecimentos: 219
Agradecido 989 vez em 321 Posts
|
![]()
Step 8
Llift the mother board out taking note of the camera which is still connected to the underside of the board. You will need to unplug the ribbon circled in red. ![]() Step 9 Place the mother board to the side. ![]() Step 10 Use the attached tab to pull up on the battery, there is a mild adhesive on the back side, so it will take a bit of force. ![]() |
![]() |
![]() |
![]() |
#17 |
Registrado em: 18/05/2006 Location : GB Posts: 1,356
Agradecimentos: 219
Agradecido 989 vez em 321 Posts
|
![]()
Step 11 Remove the screw circled in red.
![]() Step 12 Carefully remove the camera. ![]() |
![]() |
![]() |
![]() |
#18 |
Registrado em: 18/05/2006 Location : GB Posts: 1,356
Agradecimentos: 219
Agradecido 989 vez em 321 Posts
|
![]()
Step 13
Remove the nine screws circled in red. ![]() Step 14 Remove the headphone jack and attached flex cable. ![]() Step 15 Remove the speaker assembly which also contains the dock connector, antennae and home button as well. ![]() |
![]() |
![]() |
![]() |
#19 |
Registrado em: 18/05/2006 Location : GB Posts: 1,356
Agradecimentos: 219
Agradecido 989 vez em 321 Posts
|
![]()
Step 16
Remove the 2 screws circled in red. ![]() |
![]() |
![]() |
![]() |
#20 |
Registrado em: 18/05/2006 Location : GB Posts: 1,356
Agradecimentos: 219
Agradecido 989 vez em 321 Posts
|
![]()
Step 17
Place the vibrator assembly to the side. ![]() Step 18 - Back to the Front Half Remove the 2 screws circled in red. You will find 3 screws on the opposite side which must be removed as well. ![]() Step 19 Lift the LCD free from the front panel glass. ![]() |
![]() |
![]() |
O seguinte Usuário agradeceu à AndersonDC por essa útil mensagem: | Ouricell (26/06/2012) |