Atualizações Setool Box

[LB-celular]

Postado Originalmente por joaopaulofrancis

A versão indicada pelo amigo acima é esta na atualização acima:


the_laser's post about new upcoming release v.95 (FAQ)

Talvez vc naõ tenha notado apenas erro de digitação da pessoa q originalmente criou o tópico e ao invés de digitar v914042 digitou apenas v95. Mas valeu pela intenção q é de sempre ajudar a todos, sem distinção vale salientar que também na minha postagem tem os esquemas do cabos. Para quem quiser. Valeu?

[LB-celular]

Saiu hoje a nova versão no suporte da setool
[Somente usuários registrados podem ver os links. Clica aqui para se registrar...]

[Hosanan]

Grande e Novo Update StoolBox v0.915016

v0.915016- updated phone model names- updated bypass packages- minor and major bugfixes- added script command for visual filesystem manipulating.- added support for j132 ODM SEMC phone- added support for unlock/repair/domain change of ALL CURRENT SEMC A2 phones (cid49,51,52) solution is standalone. please FULLY read [Somente usuários registrados podem ver os links. Clica aqui para se registrar...]- added support for flash/fstools/unlock/repair of LG EMP-based phones, at the moment ku580/kf75x/kt52x (cid54) are supported.- added support for flash/fstools/unlock/repair of SAGEM EMP-based phones, at the moment my850c (cid60) is supported.rapidshare link [Somente usuários registrados podem ver os links. Clica aqui para se registrar...]happy HALLOWEEN.
Code:
thanks for retail c905 goes to foneclinic,mactermac,smathanks for LG KF750 goes to eerchantthanks for nice splash screen goes to arashflashfiles for LG and sagem are uploading, there is too much of them to finish now, and i don't want to spoil myself HALLOWEEN and delay release.
Code:
i wanted to write usual rubbish about "worldfirst,stealers,insects,etc"but then i found one proverb:the loudest lion is the one with the smallest dick.so lets see who will be "loudest lion".(guess, now flea will finally "perfect" his factory-to-product a2 conversion,muahaha)

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>> >> >>>>>>>>>>>>

F.A.Q

q: i have A2 (db3150) phone, which was unlocked by kukuruzer tool and it is "factory" now, i want to make it "retail", what to do

a:
you need setool2 version >=v0.95 for that.

1. go to a2 tab
2. select correct model, that is important.
3. go to settings tab.
4. mark "use signed mode" , "use alternative security bypass"
5. go back to a2 tab
6. set "retail" domain
7. press unlock
8. follow program instructions
9. your phone is converted to "retail" state.

you do not need credits for that procedure.

q: how to unlock/repair a2 phone (db3000,db3150,db3210) using altbypass option?
what problems can i encounter and how to avoid them ? how many credits i need ?

a:
you need setool2 version >=v0.95 for that.

first, you can repair ANY software problems for currently released A2 phones.
for that, you need to do several simple steps:

1. go to a2 tab
2. select correct model, that is important.
3. go to settings tab.
4. mark "use signed mode" , "use alternative security bypass", "unlock after flash"
5. go back to a2 tab
6. set desired domain ("retail" is best choice)
7. if you want to flash phone, add neccessary firmwares to firmware area and select correct custpack
8. if you selected firmwares, press flash, otherwise press unlock.
9. follow program instructions
10. your phone is repaired and unlocked (and flashed)

you do not need credits for that procedure.

if phone is totally damaged (foreign trim area), you required to write gdfs package from normal phone and make unlock again.

q: What is filemanager ? how to run it? why i can't read files ?

a:
you need setool2 version >=v0.914042 for that.

filemanager is visual tool to play with files.
create script (text files) with one string
Code:
fsManager:
and select it in misc edit, then press "write script" button.

note ! you can check only "signed mode", it will run filemanager fast, but you will not be able to read files, only write.
in order to read files, you need:

for db2000,db2010 phones <= cid49 - uncheck ALL settings
for db2010,db2020,pnx5230 phones <= cid53 - check "use signed mode","use alternative security bypass", "use preloader security bypass"
for a2 phones (db3150,db3210) <=cid52 - "use signed mode", "use alternative security bypass" and set domain to "r&d" or "factory"

to rename file/directory press F2 or select "rename" from popup menu
to delete file/directory press DEL or select "delete" from popup menu
note, that directory should be empty in order to delete it.
to write file/directory, drag-and-drop it from windows explorer to desired directory on phone.
to read file/directory press F5 or select "read" from popup menu.
note, that files/directory will be save to %setool2%\ph_out directory,existing files overwriting without notice.

q: i want to service j132 phone, but it not have fastport connector, only minuUSB. what to do ?

a:
you need setool2 version >=v0.914042 for that.

you should create connector yourself: select either ufs or com modification
(pinout discovered by rockerdongle team)
please note, that if you will create cable with 3 pins only, you should manually press power on button on phone when program displays "powering..."

[Somente usuários registrados podem ver os links. Clica aqui para se registrar...]

q: for curiosity i have flashed ROM image in my lg ku580/kf75x/kt52x.
phone goes dead. i unlocked it and it came back to life, but i have no network. what to do ?

a:
you need setool2 version >=v0.95 for that.

you need write gdfs package from working phone.
just select correct model, add to misc. edit gdfs package and press "write gdfs".

q: i can not connect lg ku580/lg75x/kt52x/sagem my805c to setool2 with supplied USB cable. phone simple turns on and setool2 don't recognize it.

a:
you need setool2 version >=v0.95 for that.

you should use special service usb cable. pinout and conversion of supplied cable to "service" is attached
conversion for ku580/kf75x/kt52x usb cables:
[Somente usuários registrados podem ver os links. Clica aqui para se registrar...]
conversion for sagem my850c cable
[Somente usuários registrados podem ver os links. Clica aqui para se registrar...]

or you can buy ready cable from GPG industries

[Cloves Nascimento]

Postado Originalmente por LB-celular

Saiu hoje a nova versão no suporte da setool
[Somente usuários registrados podem ver os links. Clica aqui para se registrar...]

Descompacte o arquivo para o directorio de setool e substitua os arquivos.

[thiago1984]

v0.914041 e a v0.915016 qual e a melhor??/
v0.915016 conseguir fazer unlock k850 sem log
qual a diferença v0.914041 e a v0.915016?
a v0.915016 e a mais recente que a v0.914041?

[joaopaulofrancis]

Se você notar a data de postagem de cada uma atualização verá qual é a mais atual, e suas respectivas funções de acordo com as notícias de seu fabricante.

v0.914041: É a versão passada.

v0.915016: É a versão mais atual, ela foi liberado desbloqueio Plataforma A2, e alem faz todas as funçções que a v0.914041 e a v0.914042 faz.

Para não confundir sempre qual é a mais atual, é só verificar os número da versão em ordem crescente.

[joaopaulofrancis]

Setool new update v0.915017 new changes Bug fixed


v0.915017

- on some PNX5230 CID combination unlock by patch produced 5-locks
units with "err:19" message. that is fixed now
- k600 loader produced weird version output, that is fixed.
- added trim area images for completely killed a2 phones
(ta_forceopen err: 0006)

flash them as firmware. please note, that k850 trim area image only
working for K850, while for any other semc a2-phone
Shinobu_TA.ssw will do job just fine.

also please note, that for 100% normal work after trim area repair you
must full flash phone, then write gdfs package from normal working phone,
finally you must unlock phone.

i almost sure, thread with gdfs packages for a2 phone will appear soon.


v0.915017

Link para Download

[Somente usuários registrados podem ver os links. Clica aqui para se registrar...]

Ou baixar o arquivo em anexo abaixo.

[gasorive]

quais os modelos que faço com esse cabo my850c

Postado Originalmente por Hosanan

Grande e Novo Update StoolBox v0.915016

v0.915016- updated phone model names- updated bypass packages- minor and major bugfixes- added script command for visual filesystem manipulating.- added support for j132 ODM SEMC phone- added support for unlock/repair/domain change of ALL CURRENT SEMC A2 phones (cid49,51,52) solution is standalone. please FULLY read [Somente usuários registrados podem ver os links. Clica aqui para se registrar...]- added support for flash/fstools/unlock/repair of LG EMP-based phones, at the moment ku580/kf75x/kt52x (cid54) are supported.- added support for flash/fstools/unlock/repair of SAGEM EMP-based phones, at the moment my850c (cid60) is supported.rapidshare link [Somente usuários registrados podem ver os links. Clica aqui para se registrar...]happy HALLOWEEN.
Code:
thanks for retail c905 goes to foneclinic,mactermac,smathanks for LG KF750 goes to eerchantthanks for nice splash screen goes to arashflashfiles for LG and sagem are uploading, there is too much of them to finish now, and i don't want to spoil myself HALLOWEEN and delay release.
Code:
i wanted to write usual rubbish about "worldfirst,stealers,insects,etc"but then i found one proverb:the loudest lion is the one with the smallest dick.so lets see who will be "loudest lion".(guess, now flea will finally "perfect" his factory-to-product a2 conversion,muahaha)

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>> >> >>>>>>>>>>>>

F.A.Q

q: i have A2 (db3150) phone, which was unlocked by kukuruzer tool and it is "factory" now, i want to make it "retail", what to do

a:
you need setool2 version >=v0.95 for that.

1. go to a2 tab
2. select correct model, that is important.
3. go to settings tab.
4. mark "use signed mode" , "use alternative security bypass"
5. go back to a2 tab
6. set "retail" domain
7. press unlock
8. follow program instructions
9. your phone is converted to "retail" state.

you do not need credits for that procedure.

q: how to unlock/repair a2 phone (db3000,db3150,db3210) using altbypass option?
what problems can i encounter and how to avoid them ? how many credits i need ?

a:
you need setool2 version >=v0.95 for that.

first, you can repair ANY software problems for currently released A2 phones.
for that, you need to do several simple steps:

1. go to a2 tab
2. select correct model, that is important.
3. go to settings tab.
4. mark "use signed mode" , "use alternative security bypass", "unlock after flash"
5. go back to a2 tab
6. set desired domain ("retail" is best choice)
7. if you want to flash phone, add neccessary firmwares to firmware area and select correct custpack
8. if you selected firmwares, press flash, otherwise press unlock.
9. follow program instructions
10. your phone is repaired and unlocked (and flashed)

you do not need credits for that procedure.

if phone is totally damaged (foreign trim area), you required to write gdfs package from normal phone and make unlock again.

q: What is filemanager ? how to run it? why i can't read files ?

a:
you need setool2 version >=v0.914042 for that.

filemanager is visual tool to play with files.
create script (text files) with one string
Code:
fsManager:
and select it in misc edit, then press "write script" button.

note ! you can check only "signed mode", it will run filemanager fast, but you will not be able to read files, only write.
in order to read files, you need:

for db2000,db2010 phones <= cid49 - uncheck ALL settings
for db2010,db2020,pnx5230 phones <= cid53 - check "use signed mode","use alternative security bypass", "use preloader security bypass"
for a2 phones (db3150,db3210) <=cid52 - "use signed mode", "use alternative security bypass" and set domain to "r&d" or "factory"

to rename file/directory press F2 or select "rename" from popup menu
to delete file/directory press DEL or select "delete" from popup menu
note, that directory should be empty in order to delete it.
to write file/directory, drag-and-drop it from windows explorer to desired directory on phone.
to read file/directory press F5 or select "read" from popup menu.
note, that files/directory will be save to %setool2%\ph_out directory,existing files overwriting without notice.

q: i want to service j132 phone, but it not have fastport connector, only minuUSB. what to do ?

a:
you need setool2 version >=v0.914042 for that.

you should create connector yourself: select either ufs or com modification
(pinout discovered by rockerdongle team)
please note, that if you will create cable with 3 pins only, you should manually press power on button on phone when program displays "powering..."

[Somente usuários registrados podem ver os links. Clica aqui para se registrar...]

q: for curiosity i have flashed ROM image in my lg ku580/kf75x/kt52x.
phone goes dead. i unlocked it and it came back to life, but i have no network. what to do ?

a:
you need setool2 version >=v0.95 for that.

you need write gdfs package from working phone.
just select correct model, add to misc. edit gdfs package and press "write gdfs".

q: i can not connect lg ku580/lg75x/kt52x/sagem my805c to setool2 with supplied USB cable. phone simple turns on and setool2 don't recognize it.

a:
you need setool2 version >=v0.95 for that.

you should use special service usb cable. pinout and conversion of supplied cable to "service" is attached
conversion for ku580/kf75x/kt52x usb cables:
[Somente usuários registrados podem ver os links. Clica aqui para se registrar...]
conversion for sagem my850c cable
[Somente usuários registrados podem ver os links. Clica aqui para se registrar...]

or you can buy ready cable from GPG industries

[nadson]

v0.915016_to_v0.915018

[liduvino]

Postado Originalmente por nadson

v0.915016_to_v0.915018

Setool new update
v0.915018

- security backup was saved with wrong script command, fixed,
thx to gbluez for reporting.