Procedimentos Realizados com Sucesso pela Octoplus Samsung - Postem aqui!!!

[ligteltelecom]

Samsung Galay J5 Prime SM-G570M Binário V3 - Remoção de Conta Google via Cabo UART pela Octoplus Samsung


Procedimento realizado com sucesso após downgrade do SBOOT (utilizado apenas Sboot da combination com binario 3).




Log da operação:

Bemvindo na  Octoplus Box Samsung software versão 2.7.6
-----------------------------------------------------------------------------------
To connect SM-G570M phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected AP file: C:\Users\Abilio\Desktop\Ligtel Flash\Samsung FRP
\G570M\SM-G570M_COMBINATION_UUB_FA60_G570MUBU3ARG1
_LIGTELGSM.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G570M into Download Mode, You have to perform the 
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on 
Advanced mode!
Firmware write started.
Escrevendo a secção BOOTLOADER...
A secção BOOTLOADER foi escrita com êxito
A escritura do firmware foi completada com êxito
Performed by 2.7.6.1 Software version.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Porto seleccionado: COM10
Modelo seleccionado: SM-G570M
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and 
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Leyendo data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and 
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..unsuccessful
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and 
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.6.1 Software version.